Maxxus is an infrared sauna line sold by Golden Designs Inc., whose own store lists Maxxus alongside its Dynamic Saunas and GD Saunas collections (the Amazon listings carry the DYNAMIC SAUNAS name). The line covers the part of the market most home buyers actually shop: pre-fabricated indoor cabins for two or three people that ship on a pallet and assemble in a spare room, basement or enclosed garage (Golden Designs’ product pages state indoor use only). The cabins are built from reforested Canadian wood, use far infrared carbon heating panels (plus near infrared elements on the full spectrum models) rather than a traditional rock-and-stove setup, and the current listings emphasize low electromagnetic field (EMF) readings at the heater panels along with interior color lighting. This guide works through the Maxxus models detailed below, explains how the lineup is organized, compares the published specifications side by side, and sets out what to sort out before delivery day. Everything here is based on the published listing features for each model, not on first-hand use, and nothing in this guide is medical advice.
How the Maxxus Saunas lineup is organized
Across the models covered here, the lineup splits into two clear families.
Full spectrum cedar cabins (the MX-M series). The MX-M356-01, MX-M306-01 and MX-M206-01 are all described as full spectrum, meaning each cabin combines PureTech near zero EMF FAR infrared carbon panels with a smaller number of near infrared elements. All three are built from natural reforested Canadian Clear Red Cedar, operate up to 140F with an ideal range given as 118 to 135F, and include an interior chromotherapy color lighting system plus exterior accent lighting. The Amazon listings state EMF under 2MG when sitting two to three inches from the heating panels, while Golden Designs’ own MX-M356-01 page states under 3MG at the same distance, so treat the figure as a manufacturer claim that varies by source. Within this family the difference is footprint, seating and how many heaters are fitted: the M356 is a three-person corner cabin, the M306 a three-person rectangular cabin, and the M206 a two-person cabin.
Far infrared hemlock cabins. The Maxxus 3-person low EMF FAR infrared carbon Canadian Hemlock sauna and the Maxxus Venice Elite 2-person sit in a simpler tier. These are far-infrared-only carbon panel cabins in hemlock rather than cedar, without the near infrared elements of the MX-M series. The Venice Elite listing specifies six ultra low EMF carbon heating panels with EMF under 3MG measured at six to eight inches from the panels, the same 140F maximum and 118 to 135F ideal range, and interior chromotherapy lighting.
One point worth understanding before you compare numbers: the EMF figures quoted by these listings use different measuring distances, so “under 2MG at two to three inches” and “under 3MG at six to eight inches” are not directly interchangeable claims. Treat both as manufacturer-stated figures under the stated conditions rather than as a single ranked scale. Golden Designs also sells the Dynamic Saunas line, and our Dynamic Saunas buyer’s guide covers the sibling lineup.
The models worth knowing
Maxxus MX-M356-01 3-Person Corner Full Spectrum
This is the largest and most heavily equipped cabin in the group. It is a three-person corner unit measuring 60 by 60 by 75 inches, with a roof overhang that adds about 9.4 inches, built in Canadian Clear Red Cedar. The heater count is the headline: nine total heaters, made up of three PureTech near zero EMF FAR infrared carbon panels and six near infrared elements, with the listing stating EMF under 2MG when seated two to three inches from the panels. Interior chromotherapy color lighting and exterior accent lighting are both included.
The corner geometry is the real decision point. A 60-inch square cabin eats more floor area than a rectangular model of similar capacity, but it tucks into a room corner and the bench layout tends to suit people who want to sit facing inward rather than shoulder to shoulder. It fits a dedicated recovery room or finished basement where you have a usable corner and want the fullest heater configuration in the range.
- Delivery: This item will be delivered curbside only on a pallet by a freight carrier.
- Wood: Natural reforested Canadian Clear Red Cedar wood construction
- Capacity: 3 person – Overall Dimensions: (WDH): 60″ x 60″ x 75″ (roof overhang: add 9.4″)
Maxxus MX-M306-01 3-Person Full Spectrum
The MX-M306-01 offers the same three-person capacity in a conventional rectangular shell measuring 64 by 44 by 75 inches, with a 5.9-inch roof overhang. It is also Canadian Clear Red Cedar, also rated to 140F with the 118 to 135F ideal band, and carries seven total heaters: four PureTech near zero EMF FAR infrared carbon panels and three near infrared elements, again with the under-2MG figure quoted at two to three inches from the panels. Chromotherapy interior lighting and exterior accent lighting are included.
Compared with the corner model, this one trades a little heater count for a much more forgiving footprint. A 44-inch depth fits along a wall in a room where a 60-inch square cabin would dominate, and the extra width gives three-person seating or roomy space for two. It is the sensible pick if you want full spectrum cedar construction but are working with a normal spare bedroom or garage wall.
- Delivery: This item will be delivered curbside only on a pallet by a freight carrier.
- Wood: Natural reforested Canadian Clear Red Cedar wood construction
- Capacity: 3 person – Overall Dimensions: (WDH): 64″ x 44″ x 75″ (roof overhang: add 5.9″)
Maxxus MX-M206-01 2-Person Full Spectrum
The MX-M206-01 brings the full spectrum cedar formula down to a two-person cabin at 50 by 42 by 75 inches plus a 5.9-inch roof overhang. It carries six total heaters: four PureTech near zero EMF FAR infrared carbon panels and two near infrared elements, with the same under-2MG statement at two to three inches. It shares the 140F maximum, the chromotherapy interior lighting and the exterior accent lighting, and its listing also specifies Bluetooth and MP3 auxiliary connection with built-in speakers.
This is the model that suits couples and solo users who want cedar and full spectrum heating without giving up a third of a room. The audio connection is a small thing on paper but it matters in practice, since it is one of the few differences in day-to-day use between models that otherwise look alike on the spec sheet.
- Capacity: 2 person – Overall Dimensions: (WDH): 50″ x 42″ x 75″ (roof overhang: add 5.9″)
- Wood: Natural reforested Canadian Clear Red Cedar wood construction
- 6 Total Heaters, 4 PureTech Near Zero EMF (EMF Under 2MG when sitting 2 to 3 inches from the heating panels) FAR IR Carbon Panels,…
Maxxus 3-Person Low EMF FAR Infrared Carbon Hemlock Sauna
This is the pared-back three-person option: a low EMF far infrared carbon sauna built in natural hemlock. The listing details are minimal, confirming the three-person capacity, natural wood construction and hemlock species, without the near infrared elements, chromotherapy specifics or dimensional figures published for the MX-M series.
It fits a buyer who wants three-person capacity and straightforward far infrared carbon heating without paying for a full spectrum heater array or cedar cabinetry. Because the listing does not publish dimensions, power requirements or feature details, this is one to confirm directly with the seller or manufacturer before you commit to a space or an outlet.
- 3 Person Sauna
- Natural Wood
- Hemlock
Maxxus Venice Elite 2-Person Ultra Low EMF
The Venice Elite is the compact hemlock two-person cabin, measuring 48 by 42 by 75 inches and built from natural reforested Canadian Hemlock. Heating comes from six infrared carbon ultra low EMF energy-efficient heating panels, with the listing stating EMF under 3MG when sitting six to eight inches from the panels. It operates up to 140F with the same 118 to 135F ideal range and includes interior chromotherapy lighting.
At 48 by 42 inches it is the smallest footprint in this group, which makes it the most realistic option for an apartment, a corner of a home gym or a basement with limited clear wall. The trade-off against the MX-M206-01 is the far-infrared-only heater set, hemlock instead of cedar, and no audio or exterior accent lighting mentioned in the listing.
- Capacity: 2 person – Overall Dimensions: 48 W x 42 D x 75 H inches
- Wood: Natural reforested Canadian Hemlock wood construction
- Heater: 6 infrared carbon ultra low EMF energy efficient heating panels (EMF Under 3MG when sitting 6 to 8 inches from the heating…
Maxxus models compared
| Model | Type | Capacity and exterior size | Heater configuration | Wood and lighting | Best fit |
|---|---|---|---|---|---|
| MX-M356-01 | Full spectrum, corner cabin | 3 person, 60 x 60 x 75 in (add 9.4 in roof overhang) | 9 heaters: 3 FAR IR carbon panels + 6 near IR elements; EMF under 2MG at 2-3 in | Canadian Clear Red Cedar; interior chromotherapy + exterior accent lighting | Dedicated recovery room with a usable corner |
| MX-M306-01 | Full spectrum, rectangular | 3 person, 64 x 44 x 75 in (add 5.9 in roof overhang) | 7 heaters: 4 FAR IR carbon panels + 3 near IR elements; EMF under 2MG at 2-3 in | Canadian Clear Red Cedar; interior chromotherapy + exterior accent lighting | Three-person capacity along a standard wall |
| MX-M206-01 | Full spectrum, rectangular | 2 person, 50 x 42 x 75 in (add 5.9 in roof overhang) | 6 heaters: 4 FAR IR carbon panels + 2 near IR elements; EMF under 2MG at 2-3 in | Canadian Clear Red Cedar; interior chromotherapy + exterior accent lighting; Bluetooth/MP3 aux with speakers | Couples who want cedar and full spectrum in a smaller shell |
| Maxxus 3-Person Hemlock | Far infrared carbon, low EMF | 3 person; dimensions not published in listing | FAR infrared carbon heating; low EMF (no figure or distance published) | Natural hemlock; lighting not specified | Simplest route to three-person far infrared |
| Venice Elite | Far infrared carbon, ultra low EMF | 2 person, 48 x 42 x 75 in | 6 infrared carbon panels; EMF under 3MG at 6-8 in | Canadian Hemlock; interior chromotherapy lighting | Smallest footprint for tight rooms |
All models with a published temperature spec operate up to 140F with an ideal range of 118 to 135F. The Amazon listings do not state electrical requirements. Golden Designs’ own product pages for the MX-M356-01 and the hemlock MX-K356-01 specify a 120V/20 amp non-GFCI dedicated receptacle and breaker (not 220/240V) and advise consulting a certified electrician. Confirm the requirement for your exact model before you plan an outlet.
How to choose
Start with the room, not the model. Measure the clear floor space and, critically, the ceiling height. Every Maxxus cabin here with published dimensions is 75 inches tall before you add the roof overhang, so a low basement ceiling or a sloped garage roofline can rule out a model regardless of its heater count. Also measure your doorways, stair turns and the path from the curb, because these ship curbside on a pallet.
Then decide between corner and rectangular. If you have a corner to give up, the MX-M356-01 uses it well. If your available space is a wall, the MX-M306-01 at 44 inches deep or the MX-M206-01 at 42 inches deep will sit more naturally.
Choose full spectrum or far infrared on how much heater hardware you want. The MX-M series pairs FAR infrared carbon panels with near infrared elements; the hemlock models use far infrared carbon panels only. Both are infrared cabins in the same temperature range, so this is a question of configuration and budget rather than one being a replacement for the other.
Weigh cedar against hemlock. Cedar is the traditional premium sauna species and the MX-M cabins use Canadian Clear Red Cedar; the hemlock models use a lighter, more neutral-smelling wood. Both are described as reforested. This is largely a preference call on scent and appearance.
Finally, plan the small stuff. Backrests, towels, a thermometer, a floor mat and a water bottle make a new cabin usable from day one, and our roundup of sauna accessories worth buying once the sauna arrives covers the practical list. If you are building a wider hot-and-cold routine, our home recovery room guide works through how a cabin sits alongside other gear. And if you ever find a cabin running cooler than expected, work through our safe infrared sauna troubleshooting guide before pulling panels apart.
Installation and safety
These are freight items. The MX-M series and Venice Elite listings state curbside delivery only, on a pallet, by a freight carrier. That means the driver is not obligated to bring the sauna inside, up a drive or down stairs. Arrange two or more people and a hand truck or furniture dolly for delivery day, and unbox where you can inspect panels before moving them.
On electrical work: the Amazon listings do not specify power requirements, so do not assume an ordinary shared outlet will do. Golden Designs’ pages for the MX-M356-01 and MX-K356-01 call for a dedicated 120V/20 amp non-GFCI receptacle and breaker, not 220/240V. Confirm the exact requirement for your model in its manual, and have a licensed electrician install or verify the dedicated circuit to local code. Follow the manual on GFCI rather than guessing, and keep the cabin away from showers, tubs and other sources of water. Keep the cabin on a level, dry floor, leave the clearances the manual specifies behind and above the unit, and do not run extension cords or power strips to it.
On personal safety: talk to your doctor before starting sauna or cold plunge sessions if you have heart, blood-pressure or circulation conditions, take any medication, or are pregnant. Heat sessions should start short and follow the manufacturer’s guidance for the specific model rather than any schedule you read online. Keep water nearby, get out if you feel lightheaded, nauseated or unwell, and never combine sauna sessions with alcohol or sedatives. If you pair heat with cold water immersion, never plunge alone and enter the water gradually. Children, older adults and anyone with reduced heat tolerance should only use a sauna under supervision and with medical guidance. Replacing fluids after a session matters, and our guide to electrolyte powders for post-sauna use covers that side of the routine.
Frequently asked questions
What does “full spectrum” mean in the Maxxus lineup?
In these listings, full spectrum describes a cabin that combines FAR infrared carbon heating panels with separate near infrared elements. The MX-M356-01 lists nine total heaters (three FAR IR panels plus six near IR elements), the MX-M306-01 lists seven (four plus three), and the MX-M206-01 lists six (four plus two). The hemlock models, including the Venice Elite, use far infrared carbon panels only. It is a difference in heater hardware, nothing more.
How should I read the EMF figures?
Each number is a manufacturer-stated reading at a stated distance. The MX-M cabins are listed as under 2MG when sitting two to three inches from the heating panels; the Venice Elite is listed as under 3MG when sitting six to eight inches from the panels. Because the measuring distances differ, the figures are not directly comparable, and they should be read as listing claims under those specific conditions. Golden Designs’ own MX-M356-01 page quotes under 3MG at two to three inches, so the figure for the same model also varies by source. None of these numbers is a health claim.
Cedar or hemlock: does it matter?
Practically, it comes down to appearance and scent. The MX-M series uses natural reforested Canadian Clear Red Cedar, which is darker and more aromatic; the three-person hemlock model and the Venice Elite use hemlock, which is paler and more neutral. Both are described as natural reforested wood in their listings, and the published temperature ranges are the same across models that state them.
Can one person assemble a Maxxus sauna?
Plan on at least two people. These cabins arrive as panel kits with curbside-only delivery. Golden Designs lists the MX-M356-01 as clasp-together assembly shipped in three boxes, with a 545 lb shipping weight, and the panels are heavy and awkward for one person even though the clasp system is meant to be simple. Clear the installation spot and confirm the ceiling height before the pallet arrives, since all of the models with published dimensions are 75 inches tall plus the roof overhang.
Leave a Reply